Steam water heat exchanger

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water. Heating water enters the equipment from the side of the pipe box and passes through a heat exchange surface composed of high 304 stainless steel tubes. There are four processes in total to transfer heat to the heated water, etc.

Online inquiry

Content details

Overview of HR high water and steam water heat exchangers:

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water.

Heating water enters the equipment from the side of the pipe box and passes through a heat exchange surface composed of high 304 stainless steel tubes. There are four processes in total to transfer heat to the heated water, so that the heated water reaches the required temperature. This series of heat exchangers is mainly used for the recovery of industrial waste steam, wastewater and waste heat from chemical boilers in power plants, as well as for the petrochemical environmental protection service industry, and for steam liquid and liquid liquid liquid heat exchange in light industry.

HR high water and steam water heat exchanger is a type of heat exchange equipment that uses the heat of waste gas and wastewater to heat cooling water.

HR high water and steam water heat exchangers are mainly used for the recovery of industrial waste steam and wastewater from chemical boilers in power plants, as well as for the petrochemical environmental protection service industry, and for steam liquid and liquid liquid liquid heat exchange in light industry.

-Special specifications can be arranged separately according to user needs for design schemes! Interested parties contact us!

Notes on ordering HR high water and steam water heat exchangers:

a. When ordering equipment, it is necessary to indicate in the contract whether accessories are required. If not specified, it will be considered as not equipped with accessories and only for the main body

b. The parameters listed in the table are for reference only, and can be designed and adjusted according to specific user requirements during ordering

HR High Type Water and Steam Water Heat Exchanger Technology -:

項目\型號規格		HR-10	HR-20	HR-35	HR-50	HR-80
管程（被加熱水側）	工作壓力MPa	0.588
	工作壓力MPa	0.588
	設計溫度℃	100
	進/出口溫度℃	40/50
	流量t/h	50	100	200	300	400
殼程（加熱水側）	設計壓力MPa	0.588
	工作壓力MPa	0.02
	設計溫度℃	200
	進/出口溫度℃	104
不銹鋼管換熱管	不銹鋼管材質	304
	不銹鋼管規格	Φ16×1
	不銹鋼管長度	1585
換熱面積m2		10	20	35	50	80
設備-量t/h		750	919	1334	1836	2617

HR高-型水水,汽水熱交換器主要接管表：
?

序號	型號規格	被加熱水-A	被加熱水-B	被加熱水-C	被加熱水-D
1	HR-10	PN1.0　DN80	PN1.0　DN80	PN1.0　DN65	PN1.0　DN65
2	HR-20	PN1.0　DN100	PN1.0　DN100	PN1.0　DN80	PN1.0　DN80
3	HR-35	PN1.0　DN150	PN1.0　DN150	PN1.0　DN100	PN1.0　DN100
4	HR-50	PN1.0　DN200	PN1.0　DN200	PN1.0　DN150	PN1.0　DN150
5	HR-80	PN1.0　DN250	PN1.0　DN250	PN1.0　DN150	PN1.0　DN150

?
HR高-型水水,汽水熱交換器設備附件：
?

對應型號設備附件參數		HR-10	HR-20	HR-35	HR-50	HR-80
壓力表	Y-100，Φ100	P0.245　2.5-
壓力表	數量	1	1	1	1	1
截止閥	J11T-16	PN1.57　DN15
截止閥	數量	2	2	2	2	2